by homerjon_mistaway | Dec 31, 1969 | Controller & Remote, Gen 1.3 – Setup, Gen 3 – Setup
The “iMist2-ready” handheld transmitter with the light colored label will communicate with the white “iMist2-ready” receiver but not with the first generation (black) receiver. 1. Put the iMist2-ready receiver on the misting unit into...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
See the video at Installation – Navigating the Controller (1:50) Set System Mode On the home screen, which shows day and time, press Green ► button to position ▲at top of display to one of four System Modes: OFF – daily agitation cycle only. REM...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
Setting System Mode With the display showing day, time and level, press Green ► button to position the ▲ at top of display pointing to active System Mode. OFF – daily agitation cycle only ON – remote and manual, but no programmed mist AUTO Everyday –...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
Set AUTO MIST Cycles 2 – 3 scheduled mists of 30-60 seconds in duration is common. See Mist Schedule and Duration for field standard frequency, duration and mist times. CYCLES Menu Blinking C# identifies each automatic mist cycle with current mist duration and...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
Press and hold the ▲ and ▼ arrows simultaneously for 2 seconds to activate a mist cycle for the duration programmed for MAN in the SET-UP Menu.
