by homerjon_mistaway | Dec 31, 1969 | Gen 3 Repairs
The float switch is mounted to a bracket over the back left corner of the batch tank. A buildup of residue on the post that hinders the movement of the float is the most common cause of failure of the switch to operate. If this is the case, you can clean (rather...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup, Gen 3 – Setup, Nozzle Circuit
WARNING! AIR TRAPPED IN THE FILTER DUE TO IMPROPER INSTALLATION AND SYSTEM STARTUP COULD CAUSE VIOLENT RUPTURE OF THE FILTER HOUSING RESULTING IN SEVERE PERSONAL INJURY! FOLLOW INSTRUCTIONS CAREFULLY. Do not remove Pressure Relief Valve Assembly Before...
by homerjon_mistaway | Dec 31, 1969 | Uncategorized
Use only insecticides that are labeled for use in automated misting systems and strictly follow label instructions in adding insecticide to the drum: Example: A 5% pyrethrin formulation, contains label language for use in Residential Backyards to “Mix 64 fl. Oz of...
by homerjon_mistaway | Dec 31, 1969 | Uncategorized
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 Repairs
Time: 15 minutes Tools: Phillips head screwdriver Parts: Gen 3/1.3 Brass Pump Assembly, including fittings – (#21005) 1. Reposition controller and plastic cover. See Gen 1.3: Access components by Repositioning Cover. 2. Remove existing pump A. Using...
