by Jim Jackson | Nov 5, 2018 | Uncategorized
The videos in this article demonstrate how to apply the mosquito misting system design process to a typical property. System Design Example Part 1 (9:28) System Design Example Part 2 (9:10)
by Jim Jackson | Nov 5, 2018 | Insecticide
The universe of formulations that are suitable for use in misting systems is small, and they fall into two categories – “Conventional” formulations which must be registered with the U.S. EPA because of the ingredients they contain, and “Green” formulations which do...
by Jim Jackson | Nov 2, 2018 | Uncategorized
To decide what to use in your misting system, you have to make a decision or two: Decision 1: Do you want to use a “conventional” formulation or a “green” formulation? “Conventional” formulations: “Conventional” means that the U.S. EPA requires them to be registered...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup
To download and print the manual, click Gen 1.3 Manual. -1. Pick a Suitable Location On firm level surface with good access for service. Free from flooding or sprinklers. Near GFCI outlet. Unit’s power cord is 12 ft. NEVER USE AN EXTENSION CORD! Unit requires...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 – Setup
To download and print the manual, click Gen 3: Operating Manual -1. Pick a Suitable Location On firm level surface with good access for service. Free from flooding or sprinklers. Close to water faucet dedicated to the unit. 25 ft of 3/8″ tubing included with...
