by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup
To download and print the manual, click Gen 1.3 Manual. -1. Pick a Suitable Location On firm level surface with good access for service. Free from flooding or sprinklers. Near GFCI outlet. Unit’s power cord is 12 ft. NEVER USE AN EXTENSION CORD! Unit requires...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 – Setup
To download and print the manual, click Gen 3: Operating Manual -1. Pick a Suitable Location On firm level surface with good access for service. Free from flooding or sprinklers. Close to water faucet dedicated to the unit. 25 ft of 3/8″ tubing included with...
by homerjon_mistaway | Dec 31, 1969 | Nozzle Circuit
by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Troubleshooting
Cause: Unit has calculated zero remaining volume in the bottle and must be refilled. See Gen 3: Refill Checklist
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 - Troubleshooting, Gen 3 - Troubleshooting
Potential Causes: System Mode is set to OFF or REM (or ON) and should be set to AUTO EVERYDAY or AUTO-CUSTOM. See Controller: Setting System Mode There are no AUTO MIST cycles defined. See Controller: Setting AUTO MIST Cycles The controller has calculated that the...
