by homerjon_mistaway | Dec 31, 1969 | Specs, Safety & Warranty
To Protect Against Accidental Exposure to Insecticide Permitted Insecticides and Handling Use only insecticides that are labeled for use in automated misting systems, and use only as described in the label. Insecticides that state “Not for use in outdoor residential...
by homerjon_mistaway | Dec 31, 1969 | Insecticide
A common schedule is comprised of three scheduled mists per day: A mist of 45 seconds in the hours around dawn (after the sprinkler system has finished). Another mist of 45 seconds in the time around dusk. A third mist of 45 seconds between 9PM and 1:00 AM. In this...
by homerjon_mistaway | Dec 31, 1969 | Nozzle Circuit
Follow these rules to optimize the flow out of your nozzle circuit! 1. Adjust the pump bypass to produce 250 psi at the unit, never higher. Watch the video, Basics – The Pump (7:41) 2. Each nozzle should operate in the “Target Misting Zone” between...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote, Gen 1.3 Repairs, Gen 3 Repairs
IMPORTANT: Before disassembling the controller, touch your hand to a metal object to discharge any static. Time: less than 5 mins Tools: small Phillips screwdriver Parts: Gen 3/1.3 Controller Faceplate with Buttons (#21050) 1. Remove faceplate from controller....
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
See the video at Installation – Navigating the Controller (1:50) Set System Mode On the home screen, which shows day and time, press Green ► button to position ▲at top of display to one of four System Modes: OFF – daily agitation cycle only. REM...
