by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup
Pictured: Gen 1.3 Zone Kit on mounting bracket. Disconnect Power to the Unit. The zone kit will be recognized when the controller boots up after the Zone Kit is connected. 2. Secure the zone kit mounting bracket to the chassis using the bolt at the front right...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
Gen 3 SET-UP MENU REM Set the duration for mists triggered by the remote transmitter. (Values from OFF to 120 seconds) LRN Program unit to recognize a specific remote transmitter. Hold down Green ► button for 5 seconds and wait for countdown to begin. Press and...
by homerjon_mistaway | Dec 31, 1969 | Specs, Safety & Warranty
Gen 3 – 240V – 50/60Hz Tankless Misting Unit – #90854, #91854 Download EC Declaration of Conformity. Download IEC CB Test Certificate. Download Intertek Test Verification of CE Conformity. Gen 1.3 – 240V – 50/60Hz Drum Based Misting Unit...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 Repairs
Time: 15 minutes Tools: zip tie snip and zip tie Parts: Gen 3 wiring harness (#21065) 1. Remove bottle. Reposition controller and shroud. See Gen 3: Access Components by Repositioning Shroud. 2. Remove existing wiring harness. A. Cut zip tie securing wiring...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Troubleshooting
What is ERR4? ERR4 is displayed when the batch tank took too much time to fill after the previous mist cycle. Most Common Cause: Faucet supplying water to the unit has been shut off. Note: If faucet is shut off – causing ERR4 – and then turned back on,...
