by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
Press and hold the ▲ and ▼ arrows simultaneously for 2 seconds to activate a mist cycle for the duration programmed for MAN in the SET-UP Menu.
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 - Routine Service, Gen 3 - Routine Service, Nozzle Circuit
WARNING! AIR TRAPPED IN THE FILTER DUE TO IMPROPER INSTALLATION AND SYSTEM STARTUP COULD CAUSE VIOLENT RUPTURE OF THE FILTER HOUSING RESULTING IN SEVERE PERSONAL INJURY! FOLLOW INSTRUCTIONS CAREFULLY. Before installing filter or replacing element, ensure...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 Repairs
Time: 10 minutes Tools: snip for zip tie and small zip tie paper towels to blot concentrate Parts: Gen 3 Coupler (#21060) 1. Remove bottle. Reposition controller and shroud. See Gen 3: Access Components by Repositioning Shroud. 2. Remove existing coupler and...
by homerjon_mistaway | Dec 31, 1969 | Insecticide
Is the mist safe for my family and pets? Have you ever heard the expression “the danger is in the dose?” It basically means that any material can be harmful if someone is exposed to enough of it. Obviously, for humans, “enough of it” is different for water than for...
by homerjon_mistaway | Dec 31, 1969 | Specs, Safety & Warranty
Base Functionality MistAway’s Drum-Based Misting Unit, Gen 1.3, is designed to atomize a dilute insecticide (typically contained in a 55 gallon drum) through an installed nozzle circuit to control mosquitoes and other annoying insects. The capacity of the...
