by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Troubleshooting
Note: In this video, you will see water with red food coloring (rather than insecticide concentrate) moving through the clear tubing on the discharge side of the bellows pump. There is a brief shot of the bellows pump in operation (0:12 – 0:19) that you will...
by homerjon_mistaway | Dec 31, 1969 | iMistAway
iMist2 Retrofit Kit includes: iMist2-ready receiver and antenna Handheld remote transmitter for iMist2-ready receiver iMist2 gateway, antenna, ethernet cable, power adapter 1. Confirm the controller firmware supports iMist2. Cycle power to unit and observe controller...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Troubleshooting
All Gen 3 and Gen 3+ units use a bellows-type dosing pump to meter insecticide from the cartridge into the mixing vessel. Each dosing pump contains two small valves. Gen 3 and Gen 3+ units sold prior to 2016 used a dosing pump with valves known...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 Repairs
Gen 1.3 component repairs or replacements can be made by repositioning the controller and plastic cover that protects the unit. Time: 3 minutes Tools: Phillips screwdriver 1. For access, reposition controller and cover. A. Remove screws...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
To ensure that another nearby transmitter will not accidentally activate the unit, the remote receiver can be configured to recognize a specific remote transmitter by changing the position of DIP switches on the transmitter prior to the LRN step. 1. Open the...
