by homerjon_mistaway | Dec 31, 1969 | Uncategorized
The REFILL routine in the MAINTENANCE Menu of the controller prompts the user to input the target MIX of water and insecticide, expressed in Parts Water to Concentrate. This value must be calculated from the mixing instructions found on the insecticide label:...
by homerjon_mistaway | Dec 31, 1969 | iMistAway
After you unplug the misting unit for the winter, iMist will recognize the unit is offline and will send two alerts: At 12 to 18 hours after the unit is unplugged, it will send a "Lost communication with unit" message and label the unit gray on the app and...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
The remote transmitter uses a 3V CR2032 Lithium Battery. Install the battery with the positive end facing up.
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 - Routine Service
For a more comprehensive checklist, see Gen 1.3: Routine Service Checklist 1. Calculate required volume of concentrate. Select a concentrate from the list of Gen 1.3: Approved Insecticides Remove drum cover Remove cap from drum bung Use a yardstick to measure...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 Repairs
The bellows pump is the black and blue component mounted to a bracket on the left back wall of the unit. Time: 15 minutes Tools: Phillips head screwdriver (magnetized) Zip tie snip and zip tie paper towels for blotting concentrate Pliers Parts: Gen 3 Mini Bellows...
