by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Routine Service
1. Flush coupler, dosing pump and concentrate flow line with clean water and then with air. Thread a PLUS-CAP onto a vented bottle filled with clean water, and insert into coupler. Change the MIX ratio to 50 – MAINTENANCE/REFILL routine/MIX=50. This will...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 Repairs
The motor is located in the lower left corner of the unit. The sidewalls must be removed to access it. Time: 20 minutes Tools: Phillips head screwdriver 1/2″ ratcheting wrench 1/4 nut driver Parts: Gen 3/1.3 Motor – 1/2 HP (#10800) 1. Remove...
by homerjon_mistaway | Dec 31, 1969 | Specs, Safety & Warranty
Scaricare il Manuale D’Uso Gen 3 per la stampa Fare clic per ulteriori informazioni sulle operazioni di installazione e routine Gen 3 (Inglese) Scaricare il Manuale D’Uso Gen 1.3 per la stampa Fare clic per ulteriori informazioni sulle operazioni di...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 – Setup
iMist2 is our second generation wireless technology that allows our dealers to monitor and manage misting units over the internet. For an introduction to iMistAway, see iMist – Intro Video (8:41) For installation instructions, see iMist2: Setup Part 1-...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Routine Service
1. Connect power and water supply line to unit Plug unit into GFCI outlet Inspect inline water filter element and replace (or clean) element if necessary Run water to flush supply line before connecting to filter inlet (marked “IN”) When supply line is...
