by homerjon_mistaway | Dec 31, 1969 | Gen 3 Repairs
The flow meter is the gray component with the red and black leads located against the back right wall of the unit. This component was used in Gen 3 units sold from 2007 – 2011. It is no longer available and must be replaced with a brass flow meter. This also...
by homerjon_mistaway | Dec 31, 1969 | Uncategorized
The first two videos in this article introduce the five “Universal Truths” of nozzle installation and what tools will be handy to have when you install your nozzle circuit. Those are followed by two videos that will provide technique and tips for installing nozzles...
by homerjon_mistaway | Dec 31, 1969 | Controller & Remote
Set AUTO MIST Cycles 2 – 3 scheduled mists of 30-60 seconds in duration is common. See Mist Schedule and Duration for field standard frequency, duration and mist times. CYCLES Menu Blinking C# identifies each automatic mist cycle with current mist duration and...
by homerjon_mistaway | Dec 31, 1969 | Specs, Safety & Warranty
The operations of the Gen III+ are managed by a digital controller and a number of electro-mechanical components. Information about mist schedules, duration, dosing and agitating the insecticide are entered into the controller by the user. Components –...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 Repairs
Time: 15 minutes Tools: 15 mm wrench channel lock pliers or crescent wrench 5/16″ nut driver Teflon tape Parts: Replacement Pressure Gauge Assembly – Includes Gauge and Fitting (SKU 21037) 1. Reposition controller and plastic cover. See Gen 1.3: Access...
