by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 - Troubleshooting
What is ERR3: ERR3 is displayed when the actual MIST volume is significantly greater than the target volume. Most Common Cause: leak in the nozzle circuit. Other Potential Causes: There are more nozzles installed in the nozzle circuit than entered as the NOZ count in...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Routine Service
For a more comprehensive checklist, see Gen 3: Routine Service Checklist 1. Remove Empty Bottle and Prepare New Bottle Select a concentrate from the list of Gen 3: Approved Insecticides Remove empty bottle from coupler and remove Plus Cap from pour port. (Pressing...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 - Troubleshooting
ERR2 is displayed when the batch tank fill volume is significantly less than expected. ERR2 overlaps with other error codes and should be switched OFF. Switch ERR2 to OFF position: SETUP menu, select ERR2 Switch to OFF using arrow...
by homerjon_mistaway | Dec 31, 1969 | Gen 3 Repairs
The agitate valve is the black component mounted to the right back wall of the unit over the batch tank. Time: 20 minutes Tools: Phillips head screwdriver 14mm wrench Parts: Gen 3 Agitate Valve Assembly (#21025) – includes fittings, or Gen 3 Agitate Valve...
by homerjon_mistaway | Dec 31, 1969 | Gen 1.3 - Routine Service
1. Flush misting unit components and nozzle circuit with fresh water using a 5 gallon bucket. If unit has a nozzle circuit filter, bypass it by connecting nozzle circuit tubing directly to misting unit. Set filter aside until Step 4. Loosen locking ring and move...
